Yamaha FL250G страница 36 Скачать руководство пользователя | Manualshive

Страница: 36 / 86

background image

Instruments and indicators

30

NOTICE

ECM00910

Gasoline mixed with water could cause
damage to the engine.

EMU36160

Engine trouble alert

This indicator will blink if the engine malfunc-
tions while cruising. Get back to the port soon
and consult a Yamaha dealer immediately.

NOTICE

ECM00920

In such an event, the engine will not oper-
ate properly. Consult a Yamaha dealer im-
mediately.

EMU36170

Low battery voltage-alert

If the battery voltage drops, the low battery
voltage-alert indicator and the battery voltage
value will start to blink. Get back to the port

soon if the low battery voltage-alert device
has activated. For charging the battery, con-
sult your Yamaha dealer.

EMU36232

6Y8 Multifunction speed & fuel

meters

The speed & fuel meter unit shows the boat
speed and has the functions of fuel meter, to-
tal fuel consumption display, fuel economy
display, fuel flow display, and system voltage
display. The chosen display is selected by us-
ing the “

” (set) and “

” (mode) buttons

as described in this section. If the speed sen-
sor is installed, the unit can also show the trip
display. However, even if the speed sensor is
not installed, the trip display can be shown by
connecting an optional sensor to the unit. In
addition, if optional sensors are connected to
the unit, water surface temperature display,
depth display, and clock will also be available.
For the optional sensors, consult your
Yamaha dealer.
The speed & fuel meter unit is available in
round or square types. Check your speed &
fuel meter unit type for operation information.
After the main switch is first turned on, all the
displays come on as a test. After a few sec-
onds, the gauge will change to normal opera-
tion.
For more information, see the operation man-
ual originally supplied with the meter.

ZMU05423

ZMU05425

ZMU05427

U6DXK0E0.book Page 30 Friday, May 13, 2011 3:08 PM

«
...
34
35
36
37
38
...
»

Содержание FL250G























































































Отзывы:

Нет отзывов

Похожие инструкции для FL250G

Бренд: Faytech Страницы: 2

Бренд: QDI Страницы: 69

Бренд: Giada Страницы: 2

Бренд: Quantum Страницы: 69

Бренд: JETWAY Страницы: 2

Fatal1ty 990FX Professional

Бренд: ASROCK Страницы: 287

Бренд: Nuvoton Страницы: 5

DUOX Programmer

Бренд: Fermax Страницы: 99

tps61040EVM-002

Бренд: Texas Instruments Страницы: 31

Бренд: Biostar Страницы: 37

Бренд: Supermicro Страницы: 111

Бренд: DFI Страницы: 150

Бренд: Advantech Страницы: 66

Бренд: Gigabyte Страницы: 120

Бренд: MSI Страницы: 445

Бренд: EVGA Страницы: 2

Бренд: Texas Instruments Страницы: 28

Бренд: AOpen Страницы: 8

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды