Yamaha FJR13AV(C) Скачать руководство пользователя страница 41 | Manualshive

Страница: 41 / 111

background image

INSTRUMENT AND CONTROL FUNCTIONS

3-23

3

EAU14911

Adjusting the shock absorber
assembly

This shock absorber assembly is
equipped with a spring preload adjust-
ing lever and a rebound damping force
adjusting knob.

CAUTION:

ECA10100

Never attempt to turn an adjusting
mechanism beyond the maximum or
minimum settings.

Spring preload

For riding solo, move the spring preload
adjusting lever in direction (b). For
riding with a passenger, move the
spring preload adjusting lever in direc-
tion (a).

Rebound damping force

To increase the rebound damping force
and thereby harden the rebound damp-
ing, turn the adjusting knob in direction
(a). To decrease the rebound damping
force and thereby soften the rebound
damping, turn the adjusting knob in di-
rection (b).

WARNING

EWA10220

This shock absorber contains highly
pressurized nitrogen gas. For prop-
er handling, read and understand
the following information before
handling the shock absorber. The
manufacturer cannot be held re-
sponsible for property damage or
personal injury that may result from
improper handling.

●

Do not tamper with or attempt to
open the gas cylinder.

●

Do not subject the shock ab-
sorber to an open flame or other
high heat sources, otherwise it
may explode due to excessive
gas pressure.

1. Spring preload adjusting lever

1. Rebound damping force adjusting knob

Rebound damping setting:

Minimum (soft):

20 click(s) in direction (b)*

Standard:

12 click(s) in direction (b)*

Maximum (hard):

3 click(s) in direction (b)*

* With the adjusting knob fully turned

in direction (a)

U3P610E0.book Page 23 Thursday, December 22, 2005 11:16 AM

«
...
39
40
41
42
43
...
»

Содержание FJR13AV(C)
















































































































Отзывы:

Нет отзывов

Похожие инструкции для FJR13AV(C)

Бренд: Napoleon Страницы: 2

Бренд: Raytheon Страницы: 62

Бренд: GE Страницы: 698

Бренд: Raymarine Страницы: 24

Бренд: Hansen Страницы: 72

Бренд: Quadro mdb Страницы: 4

Бренд: AAT Страницы: 16

Бренд: AAT Страницы: 40

Platinum Series

Бренд: Dairy Tech Страницы: 38

Бренд: H&S Страницы: 34

Бренд: QAL Medical Страницы: 42

Бренд: IDEAL Страницы: 12

Бренд: Idex Страницы: 141

Бренд: IDEAL Networks Страницы: 8

Бренд: IDEAL Networks Страницы: 5

Бренд: Raymarine Страницы: 124

Бренд: Raymarine Страницы: 192

MiniLift160 Classic

Бренд: Handicare Страницы: 28

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды