Yamaha FJR1300AE, Руководство пользователя

Страница: 27 / 132

Instrument an d control functions
4-10
4
Function d isplay
Push the “MENU” switch to switch the
display between the following func-
tions. The display changes each time
the switch is pushed.

Grip warmer adjusting function

Information display selection
function

Windshield adjusting function

Damping force adjusting function

Preload adjusting function
TIP
The preload adjusting function will ap-
pear only when the vehicle is stopped
with the engine running.
The following pages contain an expla-
nation of the grip warmer, information
display, and windshield functions. See
page 4-38 for an explanation of the
preload and damping force adjusting
functions.
A d justin g the g rip warmer
This vehicle is equipped with grip
warmers, which can only be used
when the engine is running. There are 4
grip warmer settings.
To increase the grip warmer tempera-
ture, push the “
” side of the select
switch. To decrease the grip warmer
temperature, push the “
” side of the
select switch.
NOTICE
ECA17932

Be sure to wear g loves when
usin g the g rip warmers.

Do not use the g rip warmers in
warm weather.

If the han d le b ar g rip or throttle
g rip b ecomes worn or d am-
a g e d , stop usin g the g rip warm-
ers an d replace the g rips.
1. Function display
1. Grip warmer adjusting function
2. Information display selection function
3. Windshield adjusting function
4. Damping force adjusting function
5. Preload adjusting function
GEAR
N
77
A.TEMP ˚F
Lo
C.TEMP ˚F
0:06
TIME TRIP
1
2 1 3
4 5
Off
Low
Middle
Display Setting
High
UBNP10E0.book Page 10 Wednesday, October 6, 2021 2:57 PM