Yamaha FAZER FZ1-SA Скачать руководство пользователя страница 61 | Manualshive

Страница: 61 / 96

background image

PERIODIC MAINTENANCE AND MINOR REPAIR

6-14

6

WARNING

EWA11360

●

Before placing the fuel tank in
the original position, make sure
that the fuel hoses are not dam-
aged. If any fuel hose is dam-
aged, do not start the engine but
have a Yamaha dealer replace
the hose, otherwise fuel may
leak.

●

Make sure that the fuel hoses
are properly connected and
routed, and not pinched.

●

Be sure to place the fuel tank
breather hose and the fuel tank
overflow hose in the original po-
sition.

11. Place the cowling in the original

position, and then install the bolts.

12. Install the panels.
13. Install the rider seat.

EAU34300

Adjusting the engine idling
speed

The engine idling speed must be
checked and, if necessary, adjusted as
follows at the intervals specified in the
periodic maintenance and lubrication
chart.
The engine should be warm before
making this adjustment.

NOTE:

The engine is warm when it quickly re-
sponds to the throttle.

Check the engine idling speed and, if
necessary, adjust it to specification by
turning the idle adjusting screw. To in-
crease the engine idling speed, turn the
screw in direction (a). To decrease the
engine idling speed, turn the screw in
direction (b).

1. Fuel tank breather/overflow hose
2. Original position (paint mark)

U5D0E0E0.book Page 14 Wednesday, October 11, 2006 11:04 AM

«
...
59
60
61
62
63
...
»

Содержание FAZER FZ1-SA

































































































Отзывы:

Нет отзывов

Похожие инструкции для FAZER FZ1-SA

Бренд: Free Spirits Страницы: 32

Бренд: GAS GAS Страницы: 56

Power Commander III 718-411

Бренд: Dynojet Страницы: 3

Бренд: FDC Страницы: 6

Бренд: MV Agusta Страницы: 36

Бренд: TB Страницы: 8

Бренд: Zero Страницы: 290

Бренд: Yamaha Страницы: 164

Бренд: Yamaha Страницы: 80

Бренд: Yamaha Страницы: 80

Бренд: PMI Страницы: 2

Бренд: DYNATEK Страницы: 6

Бренд: SCHUBERTH Страницы: 43

Бренд: Dynafit Страницы: 21

Бренд: Shark Страницы: 28

Бренд: Baotian Страницы: 22

Бренд: Yamaha Страницы: 4

Бренд: Yamaha Страницы: 12

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды