Yamaha F9.9C, Руководство пользователя

Страница: 53 / 117

E
3-16
EMU18830
WARMING UP ENGINE
1) After starting the engine, allow it to idle
for 3 minutes to warm up. Failure to do
so will shorten engine life.
2) Be sure the oil pressure indicator stays
on after starting the engine.
3) Check for a steady flow of water from
the cooling water pilot hole.
c C
8
If the oil pressure indicator goes off
after the engine starts, stop the
engine. Otherwise, serious engine
damage could occur. Check the oil
level and add oil if necessary. Consult
your Yamaha dealer if the cause can-
not be found.
8
A continuous flow of water from the
pilot hole shows that the water pump
is pumping water through the cooling
passages. If water is not flowing out of
the pilot hole at all times while the
engine is running, overheating and
serious damage could occur. Stop the
engine and check whether the cooling
water inlet on the lower case is
blocked. Consult your Yamaha dealer
if the problem cannot be located and
corrected.
309026
6G8-9-1M-3 4/4/03 11:35 AM Page 17