Yamaha F50D, Руководство по обслуживанию, Страница: 72 / 372

Rigging information
3-15
RIG
GING
8. Check that the throttle lever
q
on the
throttle body assembly contacts
e
the
throttle stop screw
w
.
9. Adjust the cable joint
9
to the pin
f
of
the throttle cam. NOTICE: The throttle
cable joint must be screwed in a mini-
mum of 8.0 mm (0.31 in)
g
.
10. Install the throttle cable joint
9
to the pin
f
on the throttle cam, and then tighten
the locknut
e
. Then install the clip
r
.
TIP:
Pull the inner cable to avoid the free play
(backlash) of the cable, and install it to the
pin.
11. Install the retaining plate
t
, and then
tighten the bolts
y
.
Remote control box installation
See “Remote control box operation manual”
or “Rigging guide”.
Installing the battery
9 Improper battery connections or cable
size selection may result in a fire.
9 When installing an isolator lead to the
positive battery terminal or battery
switch, over-current protection in com-
pliance with ABYC (E-11) must be pro-
vided.
If battery connections are reversed, thor-
ough charging system testing is required,
replace damaged components. See
“Charging unit and components” (5-28).
See “Rigging recommendations” (3-19) for
the extension battery cable length.
q
w
e
r
0
9
9 e g
f
t
y