Yamaha F30B 2018, Руководство по обслуживанию

Страница: 228 / 348

8-8
Propeller shaft housing
Checking the propeller shaft
1. Check:
• Propeller shaft
Damaged/worn

Replace.
2. Measure:
• Propeller shaft runout
Above specification

Replace.
Checking the dog clutch
1. Check:
• Dog clutch
• Shift plunger
• Slider
• Cross pin
• Spring
Checking the propeller shaft housing
1. Check:
• Propeller shaft housing
Cracked/damaged

Replace.
Checking the reverse gear
1. Check:
• Teeth and dogs of the reverse gear
Cracked/worn

Replace.
Assembling the propeller shaft as-
sembly
1. Install:
• Dog clutch “1”
• Propeller shaft “2”
• Spring (in the slider) “3”
• Slider “4”
TIP:
• Install the dog clutch “1” onto the propeller
shaft “2” with the “F” mark “a” facing toward
the forward gear.
• Align the hole “b” in the dog clutch “1” with the
hole “c” in the propeller shaft “2”.
2. Install:
• Cross pin “1”
• Spring (in the dog clutch) “2”
TIP:
When installing the cross pin, align the hole in
the dog clutch with the hole “a” in the slider.
Propeller shaft
Runout
0.02 mm (0.0008 in)
1
2
3
4
a
b
c
1
2
a