Yamaha F200B, Руководство по обслуживанию

Страница: 380 / 579

LOWR
Lower unit
8-17
4. Remove the needle bearing
8
.
Checking the propeller shaft housing
1. Check the propeller shaft housing.
Replace if cracked or damaged.
2. Check the reverse gear. Replace if
cracked or worn.
Checking the propeller shaft
1. Check the propeller shaft. Replace if
damaged or worn.
2. Measure the propeller shaft runout.
3. Check the dog clutch, shift rod joint, and
slider. Replace if cracked or worn.
Assembling the propeller shaft
assembly
1. Install the shift plunger 1 , slider 2 , balls
3 , and shift rod joint 4 into the propeller
shaft 5 .
TIP:
When installing the slider
2
, make sure that
the balls
3
do not fall out of position.
2. Align the hole
a
in the dog clutch
6
with
the hole
b
in the propeller shaft.
3. Install the cross pin
7
, and then install
the spring
8
.
TIP:
Make sure to face the “F” mark
c
on the dog
clutch
6
toward the shift rod joint.
Needle bearing attachment
9
:
90890-06611
Driver rod L3 0 : 90890-06652
Propeller shaft runout:
0.02 mm (0.0008 in)
7
9
0
8
4
4
2
2
1
1
3
3
3
5
3
6
6
8
8
7
7
c
a
b