Yamaha F150B, Руководство по обслуживанию

Страница: 263 / 458

7-50
Cylinder block
0
1
2
3
4
5
6
7
8
9
10
A
1. Install the new O-rings
a
and oil pump
b
by aligning the oil pump gear with the
crankshaft.
NOTICE: Before installing the oil
pump, make sure to fill it with engine
oil through the oil passage
a
.
Installing the crankcase cover
1. Apply sealant to the mating surface of the
crankcase cover
a
.
TIP:
Do not get any sealant inside the crankcase
cover
a
.
2. Install the crankcase cover
a
onto the
crankcase, and then tighten the bolts
b
and
c
to the specified torques in 2
stages, and in the sequence numbers
(
a
,
b
, · · ·). Apply engine oil to the bolts
b
and
c
before installation.
Installing the oil filter
1. Install the new O-rings
a
and oil filter
bracket
b
.
2. Supply engine oil to the oil passage
a
of
the oil filter bracket.
b
a
a
b
a
a
a
Bolt
b
a
–
j
(M8):
1st: 18 N·m (1.8 kgf·m, 13.3 ft·lb)
2nd: 31 N·m (3.1 kgf·m, 22.9 ft·lb)
Bolt
c
k
–
l
(M6):
1st: 7 N·m (0.7 kgf·m, 5.2 ft·lb)
2nd: 13 N·m (1.3 kgf·m, 9.6 ft·lb)
a b
c
d
e f
g
h
i
j
k
l
a
c
b
c
b
a