Operation
56
4.
Models equipped with trim rods: Once the
outboard motor is supported with the tilt
support lever, press the power trim and
tilt switch “
” (down) to retract the trim
rods.
NOTICE:
Make sure that the trim
rods retracts completely during moor-
ing. This protects the rods from ma-
rine growth and corrosion, which
could damage the power trim and tilt
mechanism.
[ECM00252]
EMU33121
Procedure for tilting down (power trim
and tilt models)
1.
Push the power trim and tilt switch “
”
(up) until the outboard motor is supported
by the tilt rod and the tilt support lever be-
comes free.
2.
Release the tilt support lever.
3.
Push the power trim and tilt switch “
”
(down) to lower the outboard motor to the
desired position.
DN
ZMU04196
ZMU04603
DN
U63P2AE0.book Page 56 Monday, March 1, 2010 1:49 PM