ELS-01/01C Version 1.6 New Functions
7
On the Wireless LAN Page of the Internet Settings Display, a new item has been added.
With this new function, certain settings are entered automatically—letting you can
quickly and easily connect the Electone to the Internet by using a wireless LAN
connection.
1
Access Point
Pressing the [Display Information] button calls up the access point list. It shows the
access points near the Electone.
Once you select the desired access point and press the [OK] button, a message appears
prompting confirmation of whether to transfer the access point settings to the Electone
or not. When you select [YES], the SSID, Channel and Encryption settings are
transferred to the Electone.
Wireless LAN Connection Settings
1
Reference Page
Wireless LAN (page 197)
NOTE
If no signal from the access
point is received, the access
point cannot be listed.
NOTE
The WEP key type, length
and WEP key are not
entered automatically. You
have to enter them by
yourself if you want to use
an access point that is
encrypted.
NOTE
An access point that is
encrypted in a non-WEP
format cannot be used.
