manualshive.com logo in svg

Yamaha Electone Stagea ELS-01, Руководство пользователя

Поделиться
Скачать
Yamaha Electone Stagea ELS-01 Скачать руководство пользователя страница 241

Appendix

14

ELS-01/01C Owner’s Manual

241

Troubleshooting

Problem

Possible Cause and Solution

GENERAL OPERATION

The sound is not heard for about 10 seconds after 
turning the power on.

This is normal; the Electone takes a while to start up.

A cracking noise is sometimes heard.

Noise may be produced when either an electrical appliance is turned on or an 
electric power tool (such as drill) is used in the proximity of the Electone. If this 
occurs, plug the Electone into an electrical outlet located as far as possible 
from the device that seems to be the source of the problem.

Interference from radio, TV, or other sources occurs.

This is caused by the proximity of a high-power broadcasting station, an 
amateur ham radio setup or a mobile phone.

The sound of the Electone causes surrounding 
objects to resonate.

Because the Electone is capable of producing powerful bass sounds, 
resonance may be caused in surrounding objects, such as cabinets or glass 
windows. To avoid this, relocate the objects or lower the Electone’s volume.

In the LCD display, there are some black points (unlit) 
or white points (always lit).

Unfortunately, this is a common characteristic of TFT-LCDs.

Some buttons on the panel do not respond.

The UPPER/LOWER ORGAN FLUTES and LEAD VOICE 2 buttons are invalid 
on the ELS-01. If you upgrade the ELS-01 to the ELS-01C, these buttons can 
be used.

Some of the LEDs in the DISPLAY SELECT section do 
not light.

The LEDs of on/off buttons (UPPER/LOWER ORGAN FLUTES, VOICE EDIT, 
RHYTHM PROGRAM, and ROTARY SP SPEED) are lit when those functions 
are turned on. The LEDs of other function’s buttons momentarily light when the 
functions are selected.

The sound is too small even when the volume is set to 
its maximum.

• The Master Volume may be set around the minimum position. Turn it 

clockwise.

• The Expression Pedal may not be pressed down. Press it down with your 

toe.

• The POWER switch of the speaker may have been turned off. Turn it on.

• (For the ELS-01C) The REAR SPEAKER switch may have been set to OFF. 

Switch it to ON.

The Electone panel does not function normally or the 
content of the memorized data has changed.

This happens very rarely. Occasionally, power surges and spikes due to 
electrical storms or other reasons may cause the Electone to malfunction and/
or alter the contents of memorized data. If this happens, perform the Factory 
Set operation to reset the Electone (page 21).

VOICES/RHYTHMS

The pitch may sound excessively high on the 
Pedalboard and low in the higher registers of the 
Lower and Upper keyboards.

This may occur when you compare the Electone’s sounds with that of a piano. 
Because of the difference of the harmonics structure, the tuning system of the 
Electone is different from the piano in the higher and lower ranges.

Some of the Voices may contain cracking and/or noisy 
sounds.

You may find these mainly in the wind instrument Voices. These are purposely 
added effects to the Voices to reproduce the characteristics of the wind 
instruments such as the pipe vibrations, breath noises and squeaks.

When too many keys are pressed, not all of the notes 
sound.

Total polyphonic capacity (notes sounding for both Upper and Lower 
Keyboards) is 14 notes. When you turn the Pedal Polyphonic mode to on, the 
total is 14 for all keyboards, Upper, Lower and Pedalboard.

When sustain length is set to HOLD, previously 
played notes are cut off.

Since the HOLD setting causes notes to keep sounding, the cumulative notes 
(elements) may go over the maximum elements that the Electone can sound. 
When this occurs, previously played notes are cut off.

Only one sound is heard when two notes of the Lead 
or Pedal Voices are simultaneously played.

For practical performance reasons, the Electone has been designed so that 
only one note of the Lead or Pedal Voices can be played at a time. If you want, 
the pedal Voice can be set to polyphonic mode (page 40).

The Pedal Voices do not sound, even though the 
volume is properly set.

• The Single Finger or Fingered Chord mode of Auto Bass Chord is on. Turn 

off the mode in the display (page 62). 

• TO LOWER buttons in the Pedal Voice sections are turned on. Turn the 

function off (page 26).

Содержание Electone Stagea ELS-01





























































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды