Yamaha Electone STAGEA ELB-02, Руководство пользователя

Страница: 74 / 215

74
4
ELB-02 Owner’s Manual
R
hyth
m
/K
e
y
boa
rd Percussion
                                     
Changing the rhythm volume/reverb
You can adjust the rhythm volume or amount of reverb applied to the rhythms and
the percussion sounds used in the rhythms in the Rhythm Condition display. You
can also have a Fill In play automatically by setting the Auto Fill function to ON in
Display Page 4.
To call up the Rhythm Condition display, select the desired rhythm and press the
same rhythm button again.
The buttons at the right side of the display and DATA CONTROL dial are used to
control the rhythm volume and reverb.
1 Percussion Volume
Fine adjustment of the rhythm percussion volume. Same as the panel Rhythm
Volume buttons.
Press the [A] button to select the item, then use the DATA CONTROL dial to change
the setting.
Range:
0 – 24
2
Percussion Reverb
Determines the amount of reverb applied to the rhythm percussion.
When the Reverb Depth (for entire instrument) is set to the minimum, the setting
here will have no effect.
Press the [B] button to select the item, then use the DATA CONTROL dial to change
the setting.
Range:
0 – 24
[Page 1] Rhythm Condition Display
1
2
Reference Page
Reverb Depth (page 61)
NOTE
Depending on the volume
value (set in the display), two
adjacent Volume button
lamps may be lit at the same
time, indicating an
intermediate position.
Reference Page
Adjusting the volume and
amount of reverb applied to
the Accompaniment:
(page 81)