Yamaha Electone STAGEA ELB-02, Руководство пользователя

Страница: 173 / 215

7
173
ELB-02 Owner’s Manual
Audio
4
Press the [C] “PLAY” button to call up the PLAY Page of the AUDIO
PLAY display.
Select the PLAY Page with the page buttons if another page is shown.
5
Press the [C] “PLAY” button to start playback.
When playback begins, the elapsed time is shown in the lower left of the
display.
6
Press the [D] “FINISH” button to stop playback.
The display returns to the AUDIO display.
                                     
Rewind, Fast Forward and Pause
Rewind and Fast Forward:
During audio playback (or when paused), press the [A] “REW” (Rewind) button or
[B] “FF” (Fast forward) button and hold it down until the time reaches the desired
position. When the button is released, playback is paused at the desired position. To
resume playback from the point you’ve reversed or advanced to, press the [C]
“PLAY” button.
Pause:
If you want to temporarily stop playback of the audio file press the [C] “PAUSE”
button. To resume playback from the point at which the audio file was paused, press
the [C] “PLAY” button again.
NOTE
AUDIO PLAY display
consists of two different
pages: “PLAY” or “SET.”
(Setting). Use the Page
buttons to select the
appropriate page.
AUDIO PLAY Display
[PLAY Page]
NOTICE
Never attempt to
disconnect the USB flash
drive or turn the power off
during playback. Doing so
may corrupt the USB flash
drive data.