Yamaha Electone STAGEA ELB-02, Руководство пользователя

Страница: 153 / 215

6
153
ELB-02 Owner’s Manual
Music Data R
eco
rder
(MDR)
Next Unit Settings (using more than 80 Registrations
                                     
in one performance)
You’ve learned in an earlier section that by using 5 Bank of 16 Registrations, you can
program a maximum of 400 settings to be recalled in a specified order, with the
Regist Shift function described on page 123.
When playing back a Song which uses more than 80 Registration numbers, you can
have two or more Registration Units saved to a single Song and recall them one by
one as you play the Song. This function that makes this possible is called Next Unit.
1
Connect a compatible USB flash drive to the [USB TO DEVICE]
terminal.
2
Set the User Registration order.
Set the Registration Shift mode to USER, and select Next UNIT as the Shift End
in Page 1 of the REGIST SHIFT (RIGHT) display, then set the Use Registration
order in Page 2.
For details, see “To set the User Registration order” on page 123.
3
Press the [MDR] button, and select the destination Song.
For details on selecting a Song, see steps 2 and 3 on page 135.
4
Call up the UNIT EDIT display, then save the User Registration to
“NEW UNIT” (blank Unit).
5
Press the [D] “EXIT” button to exit from the UNIT EDIT Display.
6
Repeat steps 2 through 5 above to save the Registration Units in
the order you want to recall them in the same Song.
For details, see “Saving Two or More Registration Units to One Song” on
page 149.
Once the Next Unit function has been turned on and set, you can use the function,
following the steps below.
NOTE
When repeating steps 2 – 5
and making new Registration
Shift settings, delete the
previous settings, then
continue.