background image

ELS-01/01C/01X Owner’s Manual

122

Music Data Recorder (MDR)

7

● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●

Converting to XG

This function allows you to convert the ELS-01/01C/01X song data to XG format 
data. You can playback the data using XG devices. The converted XG song data may 
sound differently from the original data.
Confirm that the media should contain enough amount of available memory before 
the conversion. The protected songs cannot be converted to XG format.

Selects a song to be converted to XG.

For details on selecting a song, see page 96.

Press the [TOOLS] button at the top right of the display to call up 
the TOOLS  Page.

Press the [CONVERT TO XG] button.

A message will appear, prompting confirmation of the converted data.

Press the [EXECUTE] to convert.

The M.D.R. starts playback of the selected song for you to decide whether you 
convert it to the XG data, or not. After finishing playback the following message 
appears.

(If necessary) Press the [RENAME] to give a name to the 
converted XG song.

For details of the method to edit the song name, see page 104.

1

2

3

4

5

Содержание Electone Stagea 01C

























































































































































































































































Отзывы: