manualshive.com logo in svg

Yamaha Electone Stagea 01C, Руководство пользователя

Поделиться
Скачать
Yamaha Electone Stagea 01C Скачать руководство пользователя страница 120

ELS-01/01C/01X Owner’s Manual

120

Music Data Recorder (MDR)

7

Eject the source media.

After ejecting the source media, the message “Insert the destination media” will 
appear on the display.

Insert the destination media to which you want to copy.

The Song Copy display appears. “MEMORY:/” (the internal memory to which 
the song has been copied in step #5) is displayed in the SONG FROM.

Press the COPY TO [CHANGE] button to call up the Song Select 
display, then select the destination song.

Only a blank song can be selected here.

Press the [EXECUTE] button to execute the Song Copy. Select 
[CANCEL] or [CLOSE] to abort the operation.

The song name of the destination is the same as the one of the source song, but 
“*” is attached at the beginning.
If you want to change the song name, see page 104.

● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●

Song Delete

You can delete data in one song; only Registration data, only performance data, or both 
of them (entire song) can be deleted. Only the songs created with the ELS-01/01C/
01X can be deleted. The songs created with the EL series such as EL-900 cannot be 
deleted.
To delete the XG song, the method is different from the song delete. Refer to “XG 
Song Delete,” page 124.

Select the song to be deleted.

For details on selecting a song, see page 96.

Press the [TOOLS] button at the top right of the display to call up 
the TOOLS  Page.

Press the [SONG DELETE] button to call up the Song Delete 
display.

6

7

8

9

1

2

3

Содержание Electone Stagea 01C

























































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды