INSTRUMENT AND CONTROL FUNCTIONS
4-6
2
3
4
5
6
7
8
9
start to move if the accelerator grip
is turned while the key is turned to
“ON”.
Speed warning indicator “SPEED”
If the vehicle speed exceeds 45 km/h,
the speed warning indicator appears
and the warning light flashes.
Operating status indicator “RUN”
This indicator appears when the vehi-
cle can be ridden.
Battery level indicator
This indicator shows the remaining bat-
tery charge.
When only one battery indicator seg-
ment remains, recharge the battery as
soon as possible. (See page 3-4 for
more information about the battery lev-
el.)
TIP
Make sure that the battery is sufficiently
charged before riding.
If the self-diagnosis detects a problem
with the battery, the warning light
comes on, the warning mark “
” ap-
pears, and all segments of the battery
level indicator flash. The electric output
from the battery may also be reduced.
The vehicle can still be ridden, but it
must be checked by a Yamaha dealer
as soon as possible.
Power mode indicator “POWER”
This indicator comes on when the vehi-
cle is set to the power mode. (See
“Switching the mode” on page 3-1 for
switching the display between the stan-
dard mode and the power mode.)
Warning light
This warning light comes on or flashes
as follows:
1. Battery level indicator
1
1. Battery level indicator
2. Warning light
3. Warning mark “
”
2
1
3
1CB-9-E0.book 6 ページ 2010年10月15日 金曜日 午前10時19分