35
EAD10 Owner’s Manual
Creating Your Own Scene
Basic Guide
You can customize preset Scenes to create your own Scene.
Creating Your Own Scene
Changing
the Reverb Type
1.
Press the button
below “REV” ([F1]).
The REVERB TYPE screen
opens.
2.
Use the [–] or [+] but-
tons to select the
Reverb type you want
to use.
Changing
the Effect Type
1.
Press the button
below “EFF” ([F2]).
The EFFECT TYPE screen
opens.
2.
Use the [–] or [+] but-
tons to select the
Effect type you want
to use.
Use the “
” ([F1]) and
“
” ([F2]) buttons to change
the tempo for tempo synced
Effects.
Changing
the Trigger Sound
Changing the Trigger
Sound on the Bass Drum
(Set as a Factory Default)
1.
Press the button below
“TRG” ([F3]).
The TRIGGER INST screen opens.
2.
Use the [–] or [+] buttons
to select the number for
the Trigger Sound you
want to use.
Trigger Sound name
Trigger Sound number
About the “BYPASS”
In each screen, selecting “BYPASS” ([F3]) causes the corresponding knob lamps to
dimly flash and the Effect not applied. Each press of the [F3] button turns the bypass set-
ting on or off. When you select “BYPASS” while the knob is turned fully to the mini-
mum position, the two lamps below the knob dimly flash.
NOTE
To check the Trigger Sound, turn the
[TRIGGER] knob clockwise to
increase the volume.