151
General Specifications
0 dBu is referenced to 0.775 Vrms.
*1: Measured peak SPL with pink noise @1 m.
*2: Dynamic: Total peak power of individual outputs. Measured at minimum load impedance, with protection released.
Burst/Continuous: Measured at nominal impedance, with protection activated.
*3: While both devices will work at a voltage of between 100 V to 240 V, as limiter settings vary depending on the supply voltage, make sure to
use this product at the supply voltage indicated on the rear panel of this product.
DZR315(-D)
DZR15(-D)
DZR12(-D)
DZR10(-D)
System Type
3-way, Bi-amped
powered speaker,
Bass-reflex
2-way, Bi-amped powered speaker, Bass-reflex
Frequency Range (-10 dB)
31 Hz – 20 kHz
34 Hz – 20 kHz
39 Hz – 20 kHz
44 Hz – 20 kHz
Coverage Angle
H75° × V50°
H90° × V50°
(Rotatable)
H90° × V60°
(Rotatable)
H90° × V60°
(Rotatable)
Crossover Frequency, Type
700 Hz (FIR-X)
2.5 kHz (Passive)
1.7 kHz (FIR-X)
1.8 kHz (FIR-X)
1.8 kHz (FIR-X)
Maximum SPL
*1
143 dB SPL
139 dB SPL
139 dB SPL
137 dB SPL
Transducer
LF
15" Cone,
3" Voice coil,
Neodymium magnet
15" Cone,
3" Voice coil,
Neodymium magnet
12" Cone,
3" Voice coil,
Neodymium magnet
10" Cone,
3" Voice coil,
Neodymium magnet
MF
8" Cone,
1.5" Voice coil,
Ferrite magnet
—
HF
2" Voice coil, 1" Throat compression driver, Titanium diaphragm, Neodymium magnet
Enclosure Material, Finish, Color
Plywood, Durable polyurea coating, Black
Floor Monitor Angle
—
50° Symmetrical
50° Symmetrical
50°
Dimensions
(W × H × D, with rubber feet)
550 × 897 × 520 mm
450 × 761 × 460 mm
410 × 646 × 394 mm
315 × 537 × 345 mm
Weight
41.6 kg
25.2 kg
21.4 kg
17.9 kg
Handles
Aluminium die-cast, Side × 2
Aluminium die-cast,
Top × 1, Side × 1
Pole Socket
—
Ø35 mm × 2 (0° or -7°)
Rigging Points
M10 × 16
M10 × 12
M10 × 8, M8 × 2
Amplifier Type
Class-D
Power Rating
*2
Dynamic
2000 W (LF:1000 W, MF/HF: 1000 W)
Burst (20ms)
1100 W (LF: 1000 W, MF/HF: 100 W)
Continuous
950 W (LF: 850 W, MF/HF: 100 W)
Cooling
Fan cooling, Variable speeds.
DSP, AD/DA
96 kHz processing with 96 kHz AD/DA and FIR filter
Connectors
Analog IN
Combo × 2, Line level (M24 dBu), Input impedance: 20 kΩ
Analog OUT
XLR3-32 × 2, CH1: THRU (fix), CH2: THRU or DSP OUT
Dante
(-D model only)
etherCON CAT5e × 2 (Daisy chain), 2 IN / 2 OUT (Fs: 44.1k, 48k, 88.2k, 96k) and
Remote control, 1000BASE-T
USB
USB 2.0 host: 5 V 500 mA
AC IN
IEC AC inlet × 1 (V-Lock)
Idle Power Consumption
45 W
1/8 Power Consumption
150 W
AC Power Requirements
*3
Depending on area of purchase; 100–240 V or 220–240 V, 50/60 Hz
Optional
Accessories
U-bracket
—
UB-DZR15H,
UB-DZR15V
UB-DZR12H,
UB-DZR12V
UB-DZR10H,
UB-DZR10V
Cover
SPCVR-DZR315
SPCVR-DZR15
SPCVR-DZR12
SPCVR-DZR10
General Specifications (En
g
lish only)
Содержание DZR315W
Страница 29: ...160 ...