Yamaha DZR315, Руководство пользователя

Страница: 10 / 31

10
HOME Screen
The HOME screen appears w hen the po w er s w itch is t u rned on.
For details, refer to the Reference Man u al on the Yamaha Pro A u dio glo b al w e b site.
https:// www .yamaha.com/proa u dio/
Display Description
q
UNIT ID, LABEL
Shows the UNIT ID and label that are used for Dante. Allows you to go to the DANTE SETUP screen to
configure and display Dante settings.
w
Input Meter (ANA*)
(*IN on standard models)
Shows the input level of the analog signal.
e
Input Meter (DNT)
Shows the input level of the Dante signal.
r
MASTER Level Displays and sets the output level (Unit: dB).
t
SP Output Meter Shows the output level.
y
Protection
(THERMAL, MUTED) Appears when the protection function is active. If the speaker is hot, THERMAL is displayed (and the out-
put level is reduced). If the conditions of the usage environment become even worse, MUTED is dis-
played (and the output signal is muted).
u
PRESET Shows the preset No. and title of the currently selected preset. Allows you to store, recall, and edit sound-
related settings. E symbol is displayed when you edit a parameter.
i
HPF Allows you to configure and display the high-pass filter frequency settings.
LPF Allows you to configure and display the low-pass filter frequency and POLARITY settings. is displayed
when the polarity is set to INVERTED.
o
D-CONTOUR
Allows you to configure and display the D-CONTOUR mode settings.
D-XSUB
Allows you to configure and display the D-XSUB mode settings.
!0
EQ Shows if the equalizer is ON or OFF. Allows you to configure the EQ settings while checking the frequency
characteristics.
!1
DELAY Allows you to configure and display delay settings.
!2
CARDIOID Allows you to configure and display the cardioid mode settings.
!3
ROUTER Allows you to configure the routing of the audio signal.
!4
UTILITY Allows you to configure and display the following settings.
- PANEL SETUP: Configures display brightness, contrast, and display/indicator auto off settings.
- PANEL LOCK: Configures misoperation prevention setting, saves/loads PIN CODE.
- DEVICE BACKUP: Saves/loads configuration data.
- DANTE SETUP : Configures and displays Dante settings.
- NETWORK : Configures and displays network settings.
- DEVICE INFORMATION: Displays the status and information unique to this product.
- INITIALIZE: Performs initialization.
- LOG: Displays recorded logs. Saves logs to USB flash drive.
- UPDATE FIRMWARE: Update the main firmware and Dante module firmware.
Full ran g e Subwoofer
o
i
!0
!1
w
e
!3
!4
q
u y
r t
o
!2
i
!0
!1
w
e
!3
!4
q
u
r t
y

Example (Dante models)
Full ran g e

Example (Dante models)
Subwoofer
Dante model
Dante model
Full ran g e
Subwoofer
Full ran g e
Subwoofer
Subwoofer
Dante model
Dante model