Screen Functions
19
e
OUTPUT
Sets the output level. Output levels can be set in 0.5 dB increments.
•
ANA. OUT1 LVL:
Sets analog output level A1 (
o
, channel 1 output level).
•
ANA. OUT2 LVL:
Sets analog output level A2 (
o
, channel 2 output level).
•
DNT. OUT1 LVL:
Sets Dante output level D1.
•
DNT. OUT2 LVL:
Sets Dante output level D2.
The UTILITY screen is used to configure device settings, and save and load settings data
to and from a USB flash drive.
PANEL SETUP
Sets the rear panel display method.
q
BRIGHTNESS
Sets the brightness of the back light of the display.
This setting can be set in 10 steps from 1 to 10.
DZR-D series
Dante model
DXS-XLF-D series
DZR series
Standard model
DXS-XLF series
UTILITY Screen
Dante model
Standard model
Screen after scrolling
downwards
Screen after scrolling
downwards
w
q
e
