69
Edit Menus /
DX200 Copy Tool
The DX200 Copy Tool box allows you to quickly copy the parameter values of one oper-
ator to another. You can copy all operator parameter values or just the EG values. This
box also allows you to view the shapes of each operator's EG and the Pitch EG --- giv-
ing you quick, at-a-glance information about all current settings for the EGs.
To select DX200 Copy Tool:
Click on any of the following title bars in the DX200 Editor window:
• PITCH ENVELOPE GENERATOR
• OSCILLATOR
• ENVELOPE GENERATOR
• KEYBOARD LEVEL SCALING
• KEYBOARD RATE SCALING
• OPERATOR
• MOD SENS
This directly calls up the DX200 Copy Tool box. It can also be selected from a pop-up
menu by clicking any inactive part of the DX200 Editor window pressing control key.
• "DX200 Copy Tool" is only available from the DX200 Editor window.
To use the Copy Tool:
Click on the desired operator or EG and drag it to the operator/EG to which you wish to
copy. For example, to copy the EG settings of Operator 6 to Operator 2, click on the EG
corresponding to Operator 6 and drag it to the EG corresponding to Operator 2.
The top row of boxes ("OP COPY") lets you copy all parameter values of one operator to
another. The second row ("EG COPY") is for copying only EG values of the operators.
The "PITCH EG" box is only for viewing edits made to the Pitch EG parameters.
DX200 Copy Tool
Содержание DX200 Editor
Страница 80: ...80 Appendix Initial Pattern Default Settings ...
Страница 81: ...81 Appendix Algorithm List Algorithm List ...
Страница 82: ...82 Appendix Algorithm List ...