REFERENCE SECTION
Utility Mode
78
2
Output
Select the output for the click sound. You can
choose from stereo (the main OUTPUT L/R
jacks), phones (headphone jack), st+ph
(OUTPUT L/R and headphone jacks) and indiv1
to indiv6 (one of the individual output jacks).
❏
Settings:
stereo, phones, st+ph, indiv1 - indiv6
3
Mode
Select the click mode.
manual:
The click can only be enabled or
disabled by the CLICK button.
play:
The click can be enabled or disabled by
the CLICK button. It is also enabled when the
sequencer starts playing and disabled when it is
stopped.
rec:
The click is enabled or disabled by the
CLICK button. It is also enabled when the
sequencer starts recording and disabled when it
is stopped.
play&rec:
The click is enabled or disabled by
the CLICK button. It is also enabled when the
sequencer is playing or recording and disabled
when it is stopped.
❏
Settings:
manual, play, rec, play&rec
4
MIDIOut
Enable or disable the transmission of the click as
MIDI events.
❏
Settings:
off, on
[UT 14] Click 2
In this page, you can select the accented click
sound (played on the first beat of the measure).
If the VoiceSet in [UT 13] is not a UserVoice, <--->
will be displayed and this will be unavailable.
The available parameters are as follows.
1
Type
Select the category of the voice to be used for the
accented click.
2
Voice[High]
Select the number and name of the voice to be
used as the accented click. You can select from
the voices in the category selected in “Type”.
❏
Settings:
Drum voice number and name
n
Any voice that is used in a drum kit can be selected.
3
Vol
Set the volume of the accented click.
❏
Settings:
0 - 127
4
Tuning
Set the pitch of the accented click.
❏
Settings:
-24.00 - +24.00
[UT 15] Click 3
In this page, you can select the on-beat click
sound (played on every beat of the measure
other than the first).
If the VoiceSet in [UT 13] is not a UserVoice, <--->
will be displayed and this will be unavailable.
The available parameters are as follows.
1
Type
Select the category of the voice to be used for the
on-beat click.
2
Voice[Mid]
Select the number and name of the voice to be
used as the on-beat click. You can select from the
voices in the category selected in “Type”.
❏
Settings:
Drum voice number and name
[UT 14] Type Voice[High] Vol Tuning
CLICK Percus 11 RollRiml 127 +10.25
1
2
3
4
[UT 15] Type Voice[Mid] Vol Tuning
CLICK Percus 11 RollRiml 127 +10.25
1
2
3
4
Содержание DTXTREME
Страница 1: ......
Страница 136: ...String Guitar Percussion Division Yamaha Corporation 2000 Yamaha Corporation Printed in Taiwan ...