Yamaha DTXTREME, Справочное руководство

Страница: 21 / 136

21
REFERENCE SECTION
Drum Kit Play Mode
End Of Recording
2.
Press the Start/Stop button again to end
recording and return to the Drum Kit/Song
page.
n
If you switch the power off during recording, you
may lose all User Song data.
n
You can edit your recorded song in Song Job
mode (page 61).
3-B. Step Recording
You can enter data one step at a time while
watching the main LCD screen.
First, select the same track as in the Recording
Standby procedure mentioned earlier (page 19)
and set the number of measures and quantization
level.
1. Setting quantization
Set the quantization level for step recording. The
quantization setting here is the minimum note
length that can be entered. For example, if you
set the quantization level to quarter notes, you
will be able to enter one quarter note at a time. If
you set it to eighth notes, you will be able to
enter one eighth note at a time.
❏
Settings: quarter note, quarter note triplet, eighth note,
eighth note triplet, 16th note, 16th note triplet
2. Step Recording
1.
Press the Start/Stop button and you will see
the data entry screen. You will see the
following blank data entry area if no data has
been entered before.
n
If data already exists, it is represented by a
●
mark.
1
Measure/beat/clock
Shows the current input (cursor) position.
2
Data area
Entered data is represented by a
●
mark. Each
measure is separated by a vertical line. The
displayed resolution will also depend on the
note length set as the quantization level.
3
Cursor
Move the cursor to the position where you
want to input data. The step size by which the
cursor can be moved is the same as the note
length set as the quantization level.
4
Empty
No data exists at the current position and a
new event can be input.
2.
Use the Data Control knob assigned to the
cursor to change the data input position. If the
position is “Empty,” a new event can be
entered.
n
If you move the cursor to a position that contains
data (denoted by a
●
mark), the contents of the
data at that position are displayed. To change the
data, or to insert a different event, see the
following column.
[RECORD] Track Quantize Free 99%
Step 1
M001-01-16|----|----|----|----|----|----
Empty
1
3
2
4