Song Recording and Editing
72
3
Volume
Determines the value for controller number 007 (volume).
If used for the built-in tone generator, this determines the
volume of each part.
❏
Settings:
000~127
4
Pan
Determines the value for controller number 010 (pan).
If used for the built-in tone generator, this determines the
stereo panning of each part.
❏
Settings:
000~064~127 (left to center to right)
5
PC#
Determines the program number you want to transmit.
If used for the built-in tone generator, this specifies a GM
voice.
❏
Settings:
001~128
n
If you want to effectively use the part selection buttons during song
playback, use MIDI channel 3 for the bass part. The rhythm part
including the drum kit is fixed to channel 10.
6
BankMSB & BankLSB
If you use an external sound module that has multiple sound
banks, you can use these two events to select the desired bank.
Use these in combination with the program number
5
parameter to select a specific sound program (voice).
❏
Settings:
000~127 (for both MSB and LSB)
n
The built-in tone generator has no sound banks. However, you can
use the two bank select events to specify where your favorite drum
kit is stored: Preset bank (MSB=125, LSB=0), User bank
(MSB=125, LSB=1), or Card bank (MSB=125, LSB=2). Specify
any Preset kit, User kit, or User kit on the memory card used with
the current song.
7
Filter
Determines the value for controller number 074 (brightness
or cut-off frequency). If used for the built-in tone generator,
this affects the filter effect for each part.
❏
Settings:
-64~0~+63
8
RevSend
Determines the value for controller number 091 (effect
depth). If used for the built-in tone generator, this
determines the master send level to the reverb effect (system
effect) for each part.
❏
Settings:
000~127
9
ChoSend
Determines the value for controller number 093 (effect
depth). If used for the built-in tone generator, this
determines the master send level to the chorus effect (system
effect) for each part.
❏
Settings:
000~127
