Yamaha DTXTREME III, Руководство пользователя

Страница: 135 / 160

Reference
DTXTREME III Owner’s Manual 135
Dr
um Kit mode
Ref
erence
Song mode
Clic
k mode
Tr
igger mode
File mode
Utility mode
Chain mode
Sampling mode
Sampling Mode
[SAMPLING]
The Sampling Record function lets you record sounds—such as vocals from a connected microphone, the signal from
an electric guitar, or audio from an external CD or MP3 player—directly to the DTXTREME III, and assign them to the
DTXTREME III as User Drum Voices. The User Drum Voices obtained via the Sampling function can be assigned to the
Drum Kit and played back by hitting the pads.
Sampling Setup
1
Turn the power off and set the GAIN knob
on the rear panel to the minimum.
2
Connect an audio device (CD player, etc.)
to the AUX IN/SAMPLING IN jack on the
rear panel.
3
Turn the power of the DTXTREME III on.
4
Press the [UTILITY] button to enter the
Utility mode, press the [F4] AUXIN button,
then press the [SF1] OUTPUT button to
call up the Output display.
5
Set the Mic/Line parameter.
When connecting low output equipment, such as a micro-
phone, electric guitar or bass, set the Mic/Line parameter to
“mic.” When connecting high output equipment, such as a
keyboard, synthesizer or CD player, set the Mic/Line parame-
ter to “line.”
6
Press the [ENTER/STORE] button to store
these settings.
IMPORTANT
In order to use the Sampling function, DIMM mod-
ules must be installed to the DTXTREME III. When no
DIMMs are installed to the DTXTREME III, you cannot
enter the Sampling mode even if you press the
[SAMPLING] button. For details on installing DIMMs,
see page 147. In addition, make sure to prepare a
USB storage device before using the Sampling func-
tion. This is necessary because the User Drum
Voices which are created via the Sampling function
and residing temporarily in DIMM will be lost when
the power is turned off.
●
User Voice
In addition to Preset Voices, the DTXTREME III has User
Voices, which you can create in the following ways:
Recording audio signals in the Sampling mode or load-
ing WAV files or AIFF files from the USB storage device
connected to the DTXTREME III in the File mode.
NOTE
• For details about how to turn the power on/off, see page 18.