7 Create Your Own Original Drum Kit
34
DTXPRESS
IV
Owner’s Manual
Use the [
>
] button to call up the KIT24 page, then rotate the
jog dial to make the following settings.
* When the Program Change Transmit On/Off is set to “
off
,”
values for PC, M and L will be “
---
” and the settings cannot
be made.
●
MIDI Channel
1
–
16
............... Target MIDI channel for the Program Change
●
Program Change Transmit On/Off
on
................... Transmits.
off
................. Does not transmit.
●
Program Change Number
001
–
128
....... Transmitted program change number.
●
Bank Select MSB, LSB
000
–
127
....... Bank select MSB number, LSB number
* For more information on Bank Select MSB and LSB, refer to
the Voice List and MIDI Data Format documents, etc. of the
particular external MIDI device you are using.
25
Set MIDI Volume and Pan—Control
Change
This function sets the MIDI Control Change Volume and Pan
values that will be transmitted when a Drum Kit is selected.
This can be set independently for each MIDI channel.
This lets you automatically change the voice Volume and Pan
on an external MIDI device when you switch the Drum Kit of
the DTXPRESS IV.
* The
˙
/
¶
indication is not shown in the upper right corner of
the display.
Use the [
>
] button to call up the KIT25 page, then rotate the
jog dial to make the following settings.
* When the Control Change Transmit On/Off is set to “
off
,”
values for Vol and Pan will show “
---
” and the settings can-
not be made.
●
MIDI Channel
1
–
16
...............Target MIDI channel for Control Change
messages
●
Control Change Transmit On/Off
on
....................Transmits.
off
.................Does not transmit.
●
Volume
0
–
127
.............Sets the Volume Control Change data value
that will be transmitted.
●
Pan
0
–
127
.............Sets the Pan Control Change data value that
will be transmitted.
26
Save the Original Voice
To save the Drum Voice you created, use the Store operation
described below and save it to the DTXPRESS IV’s memory.
Original kits can be saved as a Drum Kit to the User Drum
Kit (51–70) memory locations.
26-1.
Press the [SAVE/ENTER] button. The following dis-
play will appear.
26-2.
Rotate the jog dial to select the destination user Drum
Kit number (51–70) that you want to store.
* Data cannot be stored to the Preset Drum Kits (1–50).
* You can save data to a User Drum Kit number that
already contains data. However, be careful when
doing this, since the previous data will be overwritten
with the new data.
26-3.
If you want to change the Drum Kit name, press the
[
<
]/[
>
] buttons to move the flashing cursor to the
character you want to edit, then rotate the jog dial to
select a character. A Drum Kit name can contain a
maximum of 12 characters, and these can be selected
from the following list.
KIT24*PC
~
Ch1=on
”PC003
~
M000L003‚
Program Change Number
Bank Select MSB
Program Change
Transmit On/Off
MIDI Channel
Bank Select LSB
KIT25*CC
~
Ch1=on
”Vol=127
~
Pan=
~
64
Control Change
Transmit On/Off
MIDI Channel
Volume
Pan
If you select a different Drum Kit before perform-
ing the Store operation, all changes you have
made to the data will be lost. If you want to keep
settings or changes, make sure to perform the
Store operation.
CAUTION
Edited Drum Kit name
KIT
~
save
~
to
~
51
:[Oak
~
Custom
~~
]
Store destination
space
!"#$%&'()*+,-./0123456789:;<=>?@
ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`
abcdefghijklmnopqrstuvwxyz{|}≥≤
