Yamaha DTX400K, Руководство пользователя

Страница: 4 / 68

DTX400K/DTX430K/DTX450K Owner’s Manual
4
PRECAUTIONS
PLEASE READ CAREFULLY BEFORE PROCEEDING
Please keep this manual in a safe and handy place for future reference.
WARNING
Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical
shock, short-circuiting, damages, fire or other hazards. These precautions include, but are not limited to, the
following:
• Do not place the power cord near heat sources such as heaters or radiators. Also,
do not excessively bend or otherwise damage the cord, or place heavy objects on it.
• Only use the voltage specified as correct for the instrument. The required voltage
is printed on the name plate of the instrument.
• Use the specified adaptor (page 64) only. Using the wrong adaptor can result in
damage to the instrument or overheating.
• Check the electric plug periodically and remove any dirt or dust which may have
accumulated on it.
• Under no circumstances should any of the components of this product be taken apart
or customized. Doing so could result in electric shock, fire, injury, or malfunction.
• Do not sit or stand on the rack. Doing so could cause it to fall over or break,
possibly causing injury.
• Be careful with the holders for cymbal and tom pads as they have sharp tips. In
order to avoid injury, therefore, you should take special care whenever handling
these components.
• Be careful with the anti-slip stoppers on kick pads and foot pedals as they have
sharp tips. In order to avoid injury, therefore, you should take special care
whenever handling these components.
• Securely tighten fixing nuts and other fasteners. In addition, be sure to immediately
tighten any nuts that have come loose. If this precaution is not observed, pads may
fall off or the rack may collapse or fall over, possibly causing injury.
• Take care when setting up cables. If anyone were to trip on a cable, the instrument
could topple over and cause injury.
• Do not expose the instrument to rain, use it near water or in damp or wet conditions,
place on it any containers (such as vases, bottles or glasses) containing liquids
which might spill into any openings. If any liquid such as water seeps into the
instrument, turn off the power immediately and unplug the power cord from the AC
outlet. Then have the instrument inspected by qualified Yamaha service personnel.
• Never insert or remove an electric plug with wet hands.
• Do not put burning items, such as candles, on the unit. A burning item may fall
over and cause a fire.
• When one of the following problems occur, immediately turn off the power switch
and disconnect the electric plug from the outlet. Then have the device inspected by
Yamaha service personnel.
- The power cord or plug becomes frayed or damaged.
- It emits unusual smells or smoke.
- Some object has been dropped into the instrument.
- There is a sudden loss of sound during use of the instrument.
CAUTION
Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage
to the instrument or other property. These precautions include, but are not limited to, the following:
• Do not connect the instrument to an electrical outlet using a multiple-connector.
Doing so can result in lower sound quality, or possibly cause overheating in the
outlet.
• When removing the electric plug from the instrument or an outlet, always hold the
plug itself and not the cord. Pulling by the cord can damage it.
• Remove the electric plug from the outlet when the instrument is not to be used for
extended periods of time, or during electrical storms.
• Read carefully the attached documentation explaining the assembly process.
Failure to assemble the instrument in the proper sequence might result in damage
to the instrument or even injury.
• Do not place hands or feet under a foot switch or foot pedal. Doing so could result
in injury.
• Do not use the electronic drum kit’s rack to hold acoustic drums. Doing so could
cause clamps to break and the drums to fall off, which in turn could lead to injury.
• Mind your fingers when adjusting clamps. Fingers can easily be caught and
crushed if care is not taken during this operation.
• Be careful with the tips of supports, arms, screws, and the like. Fingers can easily
be injured by sharp tips if these components are not handled carefully.
• Do not place the instrument in an unstable position where it might accidentally fall
over.
• Before moving the instrument, remove all connected cables, to prevent damage to
the cables or injury to anyone who might trip over them.
Power supply/AC power adaptor
Assembly
Water warning
Fire warning
If you notice any abnormality
Power supply/AC power adaptor
Assembly
Location
DMI-5
1/2