Yamaha DTX, Руководство пользователя

Страница: 132 / 174

128
Feature Reference — Utility Mode
46 Pitch
This sets the pitch for each voice assigned to
each part. Tune the pitch either by semitones
(coarse) or by approximately 1.2 cent
increments (fine).
!
Move the cursor to the part number. Focus
area and rotate the Data Scroll Wheel or use
the +1/YES and -1/NO buttons to select the
part number.
"
Move the cursor to the coarse tune focus
area or the fine tune focus area and set the
pitch by rotating the Data Scroll Wheel or
using the +1/YES and -1/NO buttons.
#
Repeat steps
!
and
"
to set the pitch of
each part.
MISC.
SNARE
KICK
CYMBAL
Pitch
C 0F 0
Coarse tune
Fine tune
Part number
Settings:
The following settings can be set for the parts 1 to 16.
C (coarse tune): -64 to 0 (normal pitch) to +63
(unit=semitone)
F (fine tune): -64 to 0 (normal pitch) to +63 (unit=Ca.
1.2 cent)
47 Rev Send (Reverb Send)
This sets the reverb send level for each voice
assigned to each part.
!
Move the cursor to the part number focus
area and rotate the Data Scroll Wheel or use
the +1/YES and -1/NO buttons to select the
number.
"
Move the cursor to the level focus area and
set the level by rotating the Data Scroll
Wheel or using the +1/YES and -1/NO
buttons. The larger the value, the larger the
send level.
#
Repeat steps
!
and
"
to set the reverb send
level of each part.
MISC.
SNARE
KICK
CYMBAL
Rev Send
= 40
Reverb send
level
Part number
Settings:
The following send level can be set for the parts 1 to 16.
0 to 127.
A
The actual reverb send level of the drum kit in part 10 is
the level indicated here multiplied by the reverb send level on
the 5th display page of Drum Kit Voice Edit mode.