41
*1: When ASPECT in the INITIAL menu is set to DEFAULT, and SCREEN ASPECT in the SETUP menu is set to 16:9.
*2: When ASPECT in the INITIAL menu is set to DEFAULT, and SCREEN ASPECT in the SETUP menu is set to 4:3.
*3: Available with RGB-CS (4 line) sources from SCART terminal.
*4: Same resolution as the DEFAUL mode depending on the each SCREEN ASPECT.
Important
• This projector can recognize 1280 × 768 pixels as the maximum resolution, however, it is programmed to recognize 1280 ×
720 or 1024 × 768 pixels as the normal resolution depending on the screen aspect.
• If the resolution and frequency of your computer are not shown on the table, find the compatible resolution and frequency by
changing the resolution of your computer.
• In the case of XGA, the right side of the image may not appear. In this case, adjust TRACKING in the SIGNAL menu.
• TV60 and TV50 are equivalent to 480i and 576i respectively. When these signals are input to the VIDEO or S-VIDEO signal,
the signal mode is indicated as TV60 or TV50. When they are input to the COMPONENT terminal, the signal mode is
indicated as 480i or 576i.
• This projector cannot be connected to other equipment via an RGB-CS (4 line) connection.
Connectors
SERIAL (8-pin)
D-SUB (Mini D-SUB 15-pin)
HDMI (HDMI - 19 pin)
◆
Dimension drawings
Pin No.
Name
I / O
1
TXD
IN
2
–
–
3
–
–
4
GND
–
5
–
–
6
–
–
7
RXD
OUT
8
–
–
1
3
5
2
6
8
Pin No.
Spec.
Pin No.
Spec.
1
R(RED) / CR
9
–
2
G(GREEN) / Y
10
GND
3
B(BLUE) / CB
11
GND
4
GND
12
DDC Data
5
GND
13
HD/CS
6
GND
14
VD
7
GND
15
DDC Clock
8
GND
1
5
11
6
10
15
Pin No.
Spec.
Pin No.
Spec.
1
TMDS Data2+
11
TMDS Clock
Shield
2
TMDS Data2
Shield
12
TMDS Clock-
3
TMDS Data2-
13
-
4
TMDS Data1+
14
-
5
TMDS Data1
Shield
15
SCL
6
TMDS Data1-
16
SDA
7
TMDS Data0+
17
DDCGround
8
TMDS Data02
Shield
18
+5 V Power
9
TMDS Data0-
19
Hot Plug Detect
10
TMDS Clock+
19
1
2
18
290
69
360
102
2
(Unit: mm)
