Yamaha DME32, Руководство пользователя, Страница: 115 / 296

Crossover Processor
109
DME32—Owner’s Manual
Cross
The CROSS page features the 3-way crossover controls and crossover graph.
Note that the Gc controls (not shown here) appear only when an Adjustable Gc type
SLOPE & TYPE filter is selected.
The crossover graph at the top of the window displays the crossover settings graphically.
A vertical dotted line indicates the crossover frequency of each channel: “L” for low, “M”
for mid, and “H” for high.
The crossover parameters are explained in the following table.
Section Parameter Range Description
LOW
HPF
FREQ 20.0 Hz–20.0 kHz Adjusts the low HPF cutoff frequency
SLOPE
1
1. THRU (filter off), 6dB/oct, 12dB/oct, 18dB/oct, 24dB/oct (Butterworth).
Selects the low HPF filter slope
LPF
FREQ 20.0 Hz–20.0 kHz Adjusts the low LPF cutoff frequency
Gc
2
2. Gc controls appears only when a Gc SLOPE & TYPE filter is selected. For Butterworth, Bessel, and
Linkwitz-Riley, the Gc setting is ignored and the Gc value is fixed as follows: Butterworth and Bessel:
–3 dB, Linkwitz-Riley: –6 dB.
–6 dB to +6 dB Adjusts the low LPF gain at the cutoff frequency
SLOPE & TYPE
3
Selects the low LPF filter slope and type
MID
HPF
FREQ 20.0 Hz–20.0 kHz Adjusts the mid HPF cutoff frequency
Gc
2
–6 dB to +6 dB Adjusts the mid HPF gain at the cutoff frequency
SLOPE & TYPE
3
Selects the mid HPF filter slope and type
LPF
FREQ 20.0 Hz–20.0 kHz Adjusts the mid LPF cutoff frequency
Gc
2
–6 dB to +6 dB Adjusts the mid LPF gain at the cutoff frequency
SLOPE & TYPE
3
Selects the mid LPF filter slope and type
HIGH HPF
FREQ 20.0 Hz–20.0 kHz Adjusts the high HPF cutoff frequency
Gc
2
–6 dB to +6 dB Adjusts the high HPF gain at the cutoff frequency
SLOPE & TYPE
3
Selects the high HPF filter slope and type