32
PLAYING VOICES — THE VOICE MODE
Function Parameters — Split Voice
The Function parameters provide all settings for the Split voice. Like the similar settings in the Main
Voice mode, these settings let you change or enhance the sound of the Split voice separate from the
Main voice. These settings include:
• Volume
• Octave
• Pan
• Reverb Send Level
• Chorus Send Level
• DSP Effect Send Level
Function Parameters
No.
Parameter Name
Display Name
Range/Settings
F21
Split Voice Volume
S.Volume
0 — 127
F22
Split Voice Octave
S.Octave
-2 —
2 (octaves)
F23
Split Voice Pan
S.Pan
-7 (full left) —
0 (center) —
7 (full right)
F24
Split Voice Reverb
S.RevLvl
0 — 127
Send Level
F25
Split Voice Chorus
S.ChoLvl
0 — 127
Send Level
F26
Split Voice DSP Effect S.DspLvl
0 — 127
Send Level
F27
Split Voice
S.Voice
0 — 284
F28
Split On/Off
Split
on, off
F29
Split Point
SplitPnt
000 — 127
Description
This determines the volume of the Split voice, letting
you create an optimum mix with the Main voice.
This determines the octave range for the Split voice.
Use this to set the most suitable range for the Split
(lower) voice.
This determines the pan position of the Split voice in
the stereo image. For a spacious sounding effect, set
this value at or near -7, and set the Main Voice Pan
(page 27) at the opposite positive value.
This determines how much of the Split voice’s signal is
sent to the Reverb effect. (See page 34.) Higher values
result in a louder Reverb effect for the Split voice.
This determines how much of the Split voice’s signal is
sent to the Chorus effect. (See page 35.) Higher values
result in a louder Chorus effect for the Split voice.
This determines how much of the Split voice’s signal is
sent to the DSP effect. (See page 36.) Higher values
result in a louder DSP effect for the Split voice.
This determines the Split voice. (See list on page 104.)
This turns the Split Voice mode on/off. This can also be
controlled by a connected footswitch. (See page 21.)
This determines the highest key for the Split voice and
sets the Split “point” — in other words, the key that
separates the Split (lower) and Main (upper) voices.
(The Split voice sounds up to and including the Split
Point key.) The default Split Point is 071 (B3). The
value can also be set directly by pressing the desired
key while this parameter is selected. While this is being
set, the keyboard does not produce any sound. After
setting this, make sure to select a different parameter
or exit the Function mode before playing the keyboard.
• The Split Point setting is related to and affected by
the Pattern Split Point setting. (See page 54.)
• In order to use the entire keyboard for the Split and
Main voices, turn the following functions off: Part
Control (page 59) and Pattern Control (page 45).
• Split Voice
• Split On/Off
• Split Point