30
Function Parameters — Dual Voice
The Function parameters provide all settings for the Dual voice. Like the similar settings in the Main
Voice mode, these settings let you change or enhance the sound of the Dual voice separate from the
Main voice. These settings include:
• Volume
• Octave
• Pan
• Reverb Send Level
• Chorus Send Level
• DSP Effect Send Level
Function Parameters
No.
Parameter Name
Display Name
Range/Settings
F11
Dual Voice Volume
D.Volume
0 — 127
F12
Dual Voice Octave
D.Octave
-2 — 2 (octaves)
F13
Dual Voice Pan
D.Pan
-7 (full left) —
0 (center) —
7 (full right)
F14
Dual Voice Reverb
D.RevLvl
0 — 127
Send Level
F15
Dual Voice Chorus
D.ChoLvl
0 — 127
Send Level
F16
Dual Voice DSP
D.DspLvl
0 — 127
Effect Send Level
F17
Dual Voice
D.Voice
0 — 284
F18
Dual On/Off
Dual
on, off
Description
This determines the volume of the Dual voice, letting
you create an optimum mix with the Main voice.
This determines the octave range for the Dual voice.
Use this to create an octave layer with the Main voice.
This determines the pan position of the Dual voice in
the stereo image. For a spacious sounding effect, set
this value at or near -7, and set the Main Voice Pan
(page 27) at the opposite positive value.
This determines how much of the Dual voice’s signal is
sent to the Reverb effect. (See page 34.) Higher values
result in a louder Reverb effect for the Dual voice.
This determines how much of the Dual voice’s signal is
sent to the Chorus effect. (See page 35.) Higher values
result in a louder Chorus effect for the Dual voice.
This determines how much of the Dual voice’s signal is
sent to the DSP effect. (See page 36.) Higher values
result in a louder DSP effect for the Dual voice.
This determines the Dual voice. (See list on page 104.)
This turns the Dual Voice mode on/off. (This is the
same function as that of the DUAL button. It can also
be controlled by a connected footswitch; see page 21.)
• Dual Voice
• Dual On/Off
PLAYING VOICES — THE VOICE MODE
2
Select the desired Dual voice and make other set-
tings for the voice (if desired) in the Function mode.
Selecting and changing the Function parameters:
Press the FUNCTION button, then use the numeric keypad to select the
parameter number. After “FUNCTION” stops flashing, use the numeric
keypad or +/- buttons to change the setting. (For details, see page 18.)
• For the Dual voice to be
heard properly, make sure
to:
* Select a different voice
(#17, Dual Voice).
* Set the volume to an
appropriate level (#11, Dual
Volume).
These settings are not saved
when you turn off the
power. If you wish to save
them, save them to a User
bank in the Performance
Setup feature (page 56).
3
Exit the Function mode.
Once you’ve made all desired settings, press one of the other mode but-
tons (SONG, STYLE, or VOICE).