Enhancing the Disklavier by Hooking Up Other Devices
10
Chapter
108
Select a desired option with the cursor buttons ([
] [
]),
then press [+/YES] and [–/NO] to change setting.
Press [ENTER] to complete the operation.
Note:
When you use the USB connection,
it is required to install the USB
driver to the connected device. In
such a case, visit the following
website and download the driver.
http://download.yamaha.com/
MIDI (an acronym for Musical Instrument Digital Interface) allows
electronic device (synthesizers, etc.) to interact and work in
synchronization with other MIDI compatible device. The Disklavier enables
you to enjoy a variety of MIDI features by connecting a MIDI device or
computer to the Disklavier’s control unit.
Note:
Be sure to use the commercially
available MIDI cable with the L-
shaped connector on the control unit
end.
3
4
Hooking Up MIDI Devices
Control unit
MIDI device (sequencer, synthesizer, etc.) or computer
To MIDI
input
To MIDI
output
MIDI cable
(not supplied)
To USB
port
USB cable
(not supplied)
Содержание DISKLAVIER E3 CLASSIC
Страница 1: ......
Страница 11: ...English Classic Operation manual ...
Страница 157: ...Appendix Classic Appendix ...