67
En
MANUAL SETUP
AD
V
ANC
ED
OPERA
T
ION
English
Use to manually adjust various parameters related to the
display.
SET MENU
→
MANUAL SETUP
→
DISPLAY MENU
■
DIMMER SET (Dimmer settings)
Use to adjust the brightness of the front panel display.
STANDARD DIMMER (Standard dimmer)
Use to adjust the brightness of the front panel display
when you operate this unit by using the control buttons on
the front panel or on the remote control.
Choices: –2, –1,
OFF
AUTO DIMMER (Auto dimmer)
If no operation is performed for a specified period, the
front panel display dims. Use to adjust the brightness of
the front panel display in this case.
Choices:
OFF
(the same brightness as the STANDARD
DIMMER setting), –1 to –3 (based on the
STANDARD DIMMER setting), DISPLAY OFF
■
OSD SET (OSD settings)
Use to adjust the display position and the background
color of the OSD.
OSD SHIFT (OSD shift)
Use to adjust the vertical position of the OSD. Adjust
towards the – (minus) direction to raise the position of the
OSD, and adjust towards the + (plus) direction to lower it.
Choices: –5 to +5
Initial setting: 0
OSD BACK COLOR (OSD background color)
Use to select the background color of the OSD.
Choices:
BLUE
, GRAY
■
UNIT SET (Unit settings)
Use this to change the display unit of measurement.
Choices:
METERS
, FEET
• Select METERS to input distances in meters.
• Select FEET to input distances in feet.
If you change this setting, the adjusted beam settings may change.
DISPLAY MENU
A)
DIMMER SET
B)OSD
SET
C)UNIT
SET
[ ]/[ ]:Up/Down
[ENTER]:Enter
4 DISPLAY MENU
.
p
p
STANDARD DIMMER;;;;;
OFF
AUTO DIMMER
;;;;;;;;;;;;;
OFF
[ ]/[ ]:Up/Down [ ]/[ ]:Sel
[ENTER]:Return
A)DIMMER SET
p
p
.
p
p
Note
;;;;;;;;
;;;
p
p
.
p
p
METER
S
FEET
[ ]/[ ]:Select
[ENTER]:Return
F
F
C
)
UNIT SET
F
