Yamaha D24 Скачать руководство пользователя страница 83

Страница: 83 / 211

Chapter 8—Editing Projects

D24—Owner’s Manual

Copying Projects

The Project Copy function is used to copy projects.

Press the [EDIT] button.

The EDIT indicator lights up.

Use the JOG/DATA dial to select “PROJECT EDIT,” and then press the [ENTER]
button.

Use the JOG/DATA dial to select “COPY,” and then press the [ENTER] button.

“FROM PROJ nn—project title” appears on the display (“nn” and “project title” being
the number and title of the project to be copied).

Use the JOG/DATA dial to select the project that you want to copy, and then
press the [ENTER] button.

“TO NEWPROJ nn—ARE YOU SURE” appears on the display (“nn” being the next
available project number, which is the automatically assigned to the new project).

Press the [ENTER] button to copy the selected project, or the [CANCEL] but-
ton to cancel.

The selected project is copied.

When the copy operation is complete, “FINISHED” appears on the display.

To copy another project, press the [ENTER] button to return to step 4.

Press the [EDIT] button to leave edit.

The EDIT indicator goes out.

In the following example, project 2 is copied with new project number 4.

01 PROJECT

02 PROJECT

Copied

03 PROJECT

01 PROJECT

02 PROJECT

03 PROJECT

04 PROJECT

Содержание D24




















































































































































































































Результаты поиска

Содержание D24

Отзывы:

Yamaha D24, Руководство пользователя, Страница: 83 / 211

Результаты поиска

Содержание D24

Отзывы: