Yamaha D24 Скачать руководство пользователя страница 102

Страница: 102 / 211

Chapter 10—Editing Parts

D24—Owner’s Manual

Press the [ENTER] button to copy the selected part, or the [CANCEL] button
to cancel.

The specified part is copied.

When the copy operation is complete, “FINISHED” appears on the display and the
UNDO/REDO indicator lights up, indicating that it can be undone. See “Undoing a
Recording or Edit” on page 35 for more information.

To copy another part, press the [ENTER] button to return to step 4.

Press the [EDIT] button to leave edit.

The EDIT indicator goes out.

In the following example, the part of track 2 between the ST and ED points is copied to
to track 3 at the TO point and repeated twice.

ST point

00:01:00.00

From TR: 2

TO point

00:00:40.00

To TR: 3

Copy x1 Copy x2

ED point

00:01:15.00

Содержание D24




















































































































































































































Результаты поиска

Содержание D24

Отзывы:

Yamaha D24, Руководство пользователя, Страница: 102 / 211

Результаты поиска

Содержание D24

Отзывы: