En
123
Rear Presence
Selects whether or not rear presence speakers are connected and their size.
Settings
Layout Settings
X
This setting is not available when “Surround” or “Front Presence” is set to “None”.
Subwoofer
Selects whether or not a subwoofer is connected to the SUBWOOFER 1 or SUBWOOFER 2 jack
and its phase.
Settings
X
When the bass sound is lacking or unclear, switch the subwoofer phase.
Layout settings
X
This setting is not available when “Subwoofer 1” or “Subwoofer 2” is set to “None”.
■
Distance
Sets the distance between each speaker and listening position so that sounds from the
speakers reach the listening position at the same time. First, select the unit of distance from
“Meter” or “Feet”.
Choices
Front L, Front R, Center, Surround L, Surround R, Surround Back L, Surround Back R, Front Presence L, Front
Presence R, Rear Presence L, Rear Presence R, Subwoofer 1, Subwoofer 2
Setting range
0.30 m to 3.00 m to 24.00 m (1.0 ft to 10.0 ft to 80.0 ft), 0.05 m (0.2 ft) increments
■
Level
Adjusts the volume of each speaker.
Choices
Front L, Front R, Center, Surround L, Surround R, Surround Back L, Surround Back R, Front Presence L, Front
Presence R, Rear Presence L, Rear Presence R, Subwoofer 1, Subwoofer 2
Setting range
-10.0 dB to 0.0 dB to +10.0 dB (0.5 dB increments)
Large
Select this option for large speakers.
Small
Select this option for small speakers.
The subwoofer or front speakers will produce rear presence channel
low-frequency components lower than the specified crossover frequency
(default: 80 Hz).
None
Select this option when no rear presence speakers are connected.
Rear Height
Select this option when rear presence speakers are installed on the rear side wall.
Overhead
Select this option when rear presence speakers are installed to the ceiling.
Dolby Enabled SP
Select this option when using the Dolby Enabled speakers as the rear presence
speakers.
Use
Normal
Select this option when a subwoofer is connected to the SUBWOOFER 1 or
SUBWOOFER 2 jack (phase not reversed). The subwoofer will produce LFE
(low-frequency effect) channel audio and low-frequency components from other
channels.
Reverse
Select this option when a subwoofer is connected to the SUBWOOFER 1 or
SUBWOOFER 2 jack (phase reversed). The subwoofer will produce LFE
(low-frequency effect) channel audio and low-frequency components from other
channels.
None
Select this option when no subwoofer is connected to the SUBWOOFER 1 or
SUBWOOFER 2 jack. The front speakers will produce LFE (low-frequency effect)
channel audio and low-frequency components from other channels when both
“Subwoofer 1” and “Subwoofer 2” are set to “None”.
Left + Right
Select this option when 2 subwoofers are placed on the left and right sides of the
room.
Front + Rear
Select this option when 2 subwoofers are placed on the front and rear sides of the
room.
Monaural x2
Select this option when 2 subwoofers are placed freely.
