48
CVP-701 Reference Manual
Song R
ecor
ding via MIDI – R
ecor
ding Y
our P
e
rfor
mance via MIDI –
5
Recording a Melody
6
Specify the target channel and part for recording.
6-1
While holding down the SONG CONTROL [REC] button, press the [1
] button to specify
channel 1 for recording.
6-2
Select “RIGHT1” by using the [C]/[D] buttons.
NOTICE
Previously recorded data will be overwritten if you set channels which have recorded data to “REC.”
NOTE
To cancel the recording, press the SONG CONTROL [STOP] button.
7
Play a melody.
Recording begins automatically as soon as you play a note on the keyboard, or when you press the SONG
CONTROL [PLAY/PAUSE] button. You can play a melody while listening to the already recorded Style
performance.
When recording another channel, you can turn already recorded channels on or off in the display.
8
After you finish your performance, press the SONG CONTROL [STOP] button to stop
recording.
9
To hear the recorded performance, press the SONG CONTROL [PLAY/PAUSE] button.
This finishes recording of the Style and the melody. Now, let’s save the recorded performance as a file (below).
Saving the Recorded Performance
10
Save the recorded performance as a file. Press the [SONG SELECT] button to call up
the Song Selection display. The recorded performance will be saved as a file in the
Song Selection display. For the following instructions, see “Saving Files” in the
Owner’s Manual.
NOTICE
The recorded Song will be lost if you change to another Song or you turn the power off without executing the Save operation.
