![Yamaha CRX-N560 Скачать руководство пользователя страница 36](http://html.mh-extra.com/html/yamaha/crx-n560/crx-n560_owners-manual_895753036.webp)
Option settings
36
En
Option menu list
*1 Only when the radio is played back
*2 CRX-N560D only
Menu
Sub menu
Default
Function
Preset Delete*
1
Deletes preset stations.
Initial Scan*
1,
*
2
Scans all receivable frequencies and registers them in
the unit.
DAB Tune Aid*
1,
*
2
Shows the level of received DAB signal.
Equalizer
(
EQ Low
0
Adjusts low frequency.
EQ Mid
0
Adjusts middle frequency.
EQ High
0
Adjusts high frequency.
Balance (
P.22)
CENTER
Adjusts the volume balance of the left and right
speakers.
Music Enhancer (
OFF
Enables/disables Music Enhancer.
Timer Setting (
P.32)
Sets the wake-up timer.
Network
Info
Network
Status
Shows connection status of the unit and network.
MAC Address
Shows MAC address.
System ID
Shows the system ID.
Network
Name
Shows the name of the unit that appears on the
network.
Network
Config
DHCP Enabled
YES
Enables/disables DHCP.
IP Address
0.0.0.0
Confirms and sets the IP address.
Subnet Mask
0.0.0.0
Confirms and sets the subnet mask.
Def. Gateway
0.0.0.0
Confirms and sets the default gateway.
DNS Server(P)
0.0.0.0
Confirms and sets the primary DNS server.
DNS Server(S)
0.0.0.0
Confirms and sets the secondary DNS server.
System
Config
Clock Setting
Sets clock of this unit (
P.31).
Power Saving
Eco
Sets the eco standby (
P.12).
Auto Power
Off
Timer 8H Sets the unit into standby mode automatically (
Use Accessory
NO
Selects whether or not to supply power to a Yamaha
accessory connected through the DC OUT jack.
Firm Version
Shows the firmware version of the unit.
Firm Update
Network Updates the firmware of the unit (
Advanced
Setup
(
MAC
Add.Filter
OFF
Specifies the MAC address (up to 5) and restricts access
to this unit of network components.
(Operation with AirPlay is not affected even if [MAC
Add.Filter] is set to [ON].)
Factory Reset
Resets the unit’s settings to factory default.
Menu
Sub menu
Default
Function