Yamaha CRX-N470, Руководство пользователя

Страница: 19 / 57

Connecting to a network
19
En
Connecting to a
wireless network
Setup can be performed using a WPS (Wi-Fi Protected
Setup) button, or by sharing settings from an iOS device
(iPhone, etc.).
•
A wireless router (access point) with a WPS button is
required.
1
Press .
2
Select [Network Config] with
S
/
T
,
and press .
3
Select [Select Network] with
S
/
T
,
and press .
4
Select [Wireless] with
S
/
T
, and press
.
5
Select [WPS] with
S
/
T
, and press .
6
Press the WPS button on the wireless
router (access point).
•
Once connected, the Wi-Fi indicator stays lit.
Setup using a WPS button
2, 3, 4, 5
/ ,
ENTER
1
OPTION
About WPS
WPS (Wi-Fi Protected Setup) is a standard established by
the Wi-Fi Alliance, which allows easy establishment of a
wireless home network.
•
You cannot simultaneously use this setting with
a wired network connection or Wireless Direct
(
&
P.39).
•
If the unit is placed far away from the wireless
router (access point), a connection may not be
able to be established. In that case, place them
closer together.
Note