Yamaha CP5, Список данных

Страница: 22 / 42

CP5 / CP50 Data List
22
Effect Parameter List for Other Group
Effect Parameter List for Other Group
Insertion Block
Category — DELAY
[1] CROSS DELAY
[2] TEMPO CROSS DELAY
[3] TEMPO DELAY MONO
[4] TEMPO DELAY STEREO
[5] DELAY L, R
[6] DELAY L, C, R
[7] DELAY L, R (STEREO)
Category — CHORUS
[1] G CHORUS
No. Parameter Range Value Control
1 Delay Time L>R 0.1ms – 1638.3ms (1 – 16383)
2 Delay Time R>L 0.1ms – 1638.3ms (1 – 16383)
3 Feedback Level -63 – +63 (1 – 127)
4 Input Select L, R, L&R (0 – 2)
5 Feedback High Damp 0.1 – 1.0 (1 – 10)
6 —
7 —
8 —
9 —
10 Dry/Wet Balance D63>W – D=W – D<W63 (1 – 127)

11 —
12 —
13 EQ Low Frequency 32Hz – 2.0kHz (4 – 40)
14 EQ Low Gain -12dB – +12dB (52 – 76)
15 EQ High Frequency 500Hz – 16.0kHz (28 – 58)
16 EQ High Gain -12dB – +12dB (52 – 76)
No. Parameter Range Value Control
1 Delay Time L>R 32nd/3 – 4thx6 (0 – 19)
2 Delay Time R>L 32nd/3 – 4thx6 (0 – 19)
3 Feedback Level -63 – +63 (1 – 127)
4 Input Select L, R, L&R (0 – 2)
5 Feedback High Damp 0.1 – 1.0 (1 – 10)
6 Lag -63ms – +63ms (1 – 127)
7 —
8 —
9 —
10 Dry/Wet Balance D63>W – D=W – D<W63 (1 – 127)

11 —
12 —
13 – 16: Same as the parameters shaded in gray in CROSS DELAY above.
No. Parameter Range Value Control
1 Delay Time 32nd/3 – 4thx6 (0 – 19)
2 Feedback Level -63 – +63 (1 – 127)
3 Feedback High Damp 0.1 – 1.0 (1 – 10)
4 L/R Diffusion -63ms – +63ms (1 – 127)
5 Lag -63ms – +63ms (1 – 127)
6 —
7 —
8 —
9 —
10 Dry/Wet Balance D63>W – D=W – D<W63 (1 – 127)

11 —
12 —
13 – 16: Same as the parameters shaded in gray in CROSS DELAY above.
No. Parameter Range Value Control
1 Delay Time 32nd/3 – 4thx6 (0 – 19)
2 Feedback Level -63 – +63 (1 – 127)
3 Feedback High Damp 0.1 – 1.0 (1 – 10)
4 L/R Diffusion -63ms – +63ms (1 – 127)
5 Lag -63ms – +63ms (1 – 127)
6 —
7 —
8 —
9 —
10 Dry/Wet Balance D63>W – D=W – D<W63 (1 – 127)

11 —
12 —
13 – 16: Same as the parameters shaded in gray in CROSS DELAY above.
No. Parameter Range Value Control
1 Delay Time L 0.1ms – 1638.3ms (1 – 16383)
2 Delay Time R 0.1ms – 1638.3ms (1 – 16383)
3 Feedback Time 1 0.1ms – 1638.3ms (1 – 16383)
4 Feedback Time 2 0.1ms – 1638.3ms (1 – 16383)
5 Feedback Level -63 – +63 (1 – 127)
6 Feedback High Damp 0.1 – 1.0 (1 – 10)
7 —
8 —
9 —
10 Dry/Wet Balance D63>W – D=W – D<W63 (1 – 127)

11 —
12 —
13 – 16: Same as the parameters shaded in gray in CROSS DELAY above.
No. Parameter Range Value Control
1 Delay Time L 0.1ms_1638.3ms (1 – 16383)
2 Delay Time R 0.1ms_1638.3ms (1 – 16383)
3 Delay Time C 0.1ms_1638.3ms (1 – 16383)
4 Feedback Time 0.1ms_1638.3ms (1 – 16383)
5 Feedback Level -63_+63 (1 – 127)
6 Delay Level C 0_127 (0 – 127)
7 Feedback High Damp 0.1_1.0 (1 – 10)
8 —
9 —
10 Dry/Wet Balance D63>W _ D=W _ D<W63 (1 – 127)

11 —
12 —
13 – 16: Same as the parameters shaded in gray in CROSS DELAY above.
No. Parameter Range Value Control
1 Delay Time L 0.1ms – 1638.3ms (1 – 16383)
2 Delay Time R 0.1ms – 1638.3ms (1 – 16383)
3 Feedback Time L 0.1ms – 1638.3ms (1 – 16383)
4 Feedback Time R 0.1ms – 1638.3ms (1 – 16383)
5 Feedback Level -63 – +63 (1 – 127)
6 Feedback High Damp 0.1 – 1.0 (1 – 10)
7 —
8 —
9 —
10 Dry/Wet Balance D63>W – D=W – D<W63 (1 – 127)

11 —
15 —
13 – 16: Same as the parameters shaded in gray in CROSS DELAY above.
No. Parameter Range Value Control
1 LFO Speed 0.0Hz – 39.70Hz (0 – 127)
2 —
3 PM Depth 0 – 127 (0 – 127)
4 Feedback Level -63 – +63 (1 – 127)
5 Delay Offset 0.0ms – 50.0ms (0 – 127)
6 – 9: Same as the parameters shaded in gray in CROSS DELAY above.
10 Dry / Wet Balance D63>W – D=W – D<W63 (1 – 127)

11 EQ Mid Frequency 100Hz – 10.0kHz (14 – 54)
12 EQ Mid Gain -12dB – +12dB (52 – 76)
13 EQ Mid Width 0.1 – 12.0 (1 – 120)
14 —
15 Input Mode mono, stereo (0 – 1)
16 —