67
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Custom Style
Once created, your original custom styles can be selected for play-
back by pressing the
[DISK/CUSTOM]
button (its LED will light), and
then using the
STYLE
▲
and
▼
LCD buttons — or the data dial or
[–/+]
buttons — to select the custom style you want to play. The selected style
can then be played and used with ABC auto accompaniment in exactly
the same way as the preset styles (page 38).
• Since only one type of INTRO, FILL IN,
and ENDING section can be recorded
for each Custom Style, no “A/B” varia-
tions are produced during playback.
Playing Back Your Custom Styles
Custom Style Alert & Error Displays
The following alert and error displays may appear in the corresponding situations.
■
Insufficient Memory To Store
..............................................................
This alert message will appear if there is not enough memory to per-
form a store operation.
In this case it will be necessary to either delete a style you don’t need
or simplify the style you are currently recording. Press
CANCEL
to re-
turn to CUSTOM STYLE display page 1, at which point you can sim-
plify the current style (by clearing a part, etc.), or
DELETE
to go to the
“
Delete style ?
” display:
Use the
MEMORY No.
▲
and
▼
buttons to select the number of the
style you want to delete, then press
OK
to delete the style, or
CANCEL
to abort.
• The amount of memory being used for
the selected style is also shown on the
display (in approximate kilobytes) so
as to set up the approximate standard
which style to delete in relation to the
total 100 KB memory space.