CVP-809/CVP-805 Owner’s Manual
87
R
eg
istr
at
io
n
M
emo
ry
/P
la
yl
is
t
–
S
av
in
g
an
d
Reca
llin
g C
u
st
om
P
ane
l S
etup
s –
8
Registering Your Panel Setups
1
Set up the panel controls (such as Voice, Style and so on) as desired.
Refer to “Parameter Chart” in the Data List on the website (page 9) for a list of parameters that
can be registered with the Registration Memory function.
2
Press the [MEMORY] button in the REGISTRATION MEMORY section to call up
the Registration Memory window.
3
Press the desired REGISTRATION MEMORY [1] – [8] button to which you wish to
memorize the panel setup.
Memorized buttons are lit in red, indicating that the number button contains data and its
number is selected.
NOTICE
If you select the button whose lamp is lit in red or
g
reen here, the panel setup previously memorized to the button
will be erased and replaced by the new settin
g
s. Hence, you should memorize panel setups only to buttons that are
turned off.
4
Register various panel setups to other buttons by repeating steps 1 – 3.
The registered panel setups can be recalled by simply pressing the desired number button.
NOTE
You can also disable recall of specific item(s) when calling up the registered panel setups: [Menu]
[RegistFreeze].
Saving and Recalling Custom Panel Setups with Registration Memory
Selecting the items to be registered
Touching [
] at the bottom left of the window calls up the list for selecting the items to be registered.
Before going on to step 3, enter or remove checkmarks by touching the desired items. Items having
checkmarks will be registered.
About the lamp status
•
Red:
Data registered and currently selected
•
Green:
Data registered but not currently selected
•
Off:
No data registered
Displays or hides the list of items