CVP-809/CVP-805 Owner’s Manual
37
1
Bas
ic O
per
at
ions
1
Touch the character type.
When the Language (page 22) is set to other than Japanese:
When the Language (page 22) is set to Japanese:
2
Touch [
]/[
] or rotate the Data dial to move the cursor to the desired location.
3
Input the desired character one by one.
To delete a single character, touch [Delete]; to delete all characters at once, touch and hold
[Delete]. To enter a space, touch the space key indicated in the illustration on the previous page.
NOTE
• Depending on the display for character entry you are working in, some types of characters cannot be entered.
• A file name can contain up to 46 characters and a folder name can contain up to 50 characters.
• The following characters (half size) cannot be used: \ / : * ? " < > I
To input letters with auxiliary symbols (when Language is set to other than Japanese):
You can input letters with auxiliary symbols such as umlaut by touching and holding a letter to call up a
list. For example, touch and hold “E” to enter “Ё” from the list.
To convert into Kanji (when the Language is set to Japanese):
When the entered “hiragana” characters are shown in reverse display (highlighted), touch [
]
several times to call up the conversion options. You can change the reversed area by touching [
] or
[
]. When you find the desired Kanji, touch [
].
To change the converted kanji back to “hiragana,” touch [
].
To clear the reversed area at once, touch [
].
NOTE
To cancel this operation, touch [Cancel] before going on to step 4.
4
Touch [OK] to finalize the characters (file name, etc.) you have input.
NOTE
If the pedal box rattles or gives way when you step on the pedals, turn the adjuster so that it is set firmly against the floor (pages 116, 119,
122).
Touching [Symbol] (or [abc]) switches between entering symbols or Roman letters (and numbers).
To switch between entering capital letters or small letters, touch
(Shift).
•
: Roman letters and numbers in half size (full size)
•
: Symbols in half size (full size)
•
: Katakana in full size (half size)
•
: Hiragana and Kanji
To switch between full size or half size, touch and hold the Character Type. For example, [
] can
be called up by holding [
].
When entering Roman letters, you can switch between capital and small letters by touching
(Shift).
Using the Pedals
Damper Pedal
Sosten
u
to Pedal
Soft Pedal
