Creating/Editing MIDI Songs (Song Creator)
CVP-809/CVP-805 Reference Manual
68
The explanations here apply when one of “Ch1” – “Ch16” is selected in step 5 on
. With [Step Rec] turned on at the
bottom left of the display, you can input the notes one by one, using the controls below.
Control Names and Functions
Recording Melodies via Step Recording
1
Event List
Indicates events such as note and Voice selection which have been input. For details,
refer to
2
Song Position
(Measure: Beat:
Clock)
Indicates the current Song position. Events such as note and Voice selection you have
input are recorded at the position indicated here. You can change the current position
by touching [
U
] or [
D
] below the Measure, Beat, and Clock* respectively.
*Clock
Smallest unit for the Song position and note length. A quarter note consists of 1920 clocks.
3
Cursor
Lets you move the cursor position.
4
Step Rec
Turning this on shows the Step Recording display, and turning it off shows the Song
Edit display.
5
Velocity
Determines the velocity (loudness) of the note to be entered. The velocity value can be
specified within a range from 1 to 127. The higher the velocity value, the louder the
sound becomes.
Kbd.Vel:
Actual resulting velocity
6
Length
Determines the gate time (note length) of the note to be entered.
Manual: For freely setting the gate time. Touch “Manual” and close the pop-up window by touching
“OK,” then set the gate time to any desired percentage by using the Data dial.
1
4
5
6
8
2
3
7
127
111
95
79
63
47
31
15
80%
40%
99%
20%
Normal:
Staccato:
Tenuto:
Staccatissimo:
