Editing the Volume and Tonal Balance (Mixer)
CVP-809/CVP-805 Reference Manual
16
1
Set the Compressor to “On.”
2
Select the Master Compressor type to be edited.
•
Natural:
Natural Compressor settings in which the effect is moderately pronounced.
•
Rich:
Rich Compressor settings in which the instrument’s characteristics are optimally brought out. This is good
for enhancing acoustic instruments, jazz music, etc.
•
Punchy:
Highly exaggerated Compressor settings. This is good for enhancing rock music.
•
Electronic:
Compressor settings in which the electronic dance music’s characteristics are optimally brought out.
•
Loud:
Powerful Compressor settings. This is good for enhancing energetic music such as rock or gospel music.
•
User1–30:
Your own custom Compressor settings saved in step 4.
3
Edit the parameters related to the Master Compressor.
The indication “GR” shows the Gain Reduction (compressed level) while “Output” shows the output level according
to the instrument sound in real time.
4
Touch
(Save), then save the settings as a User Master Compressor type.
Up to 30 Master Compressor types can be created and saved.
NOTICE
The settings will be lost if you turn the power to the instrument off without executing the Save operation.
NOTE
If you want to save the Master Compressor settings to a USB flash drive, save them as a User Effect file. To do this, from
the display called up via [Menu]
[Utility]
[Factory Reset/Backup]
page 2/2, touch [Backup] of “User Effect” to
execute the Save operation (
Compression
Parameters such as Threshold, Ratio and Soft Knee (which are available on commonly
used compressors) are all changed together at the same time, letting you moderately
compress the sound.
Texture
Adds natural characteristics to the effect. The higher the value, the lighter it becomes.
NOTE
It may be easier to hear the changes when used in combination with “Compression” and
“Output.”
Output
Determines the output level.
