CVP-601 Owner’s Manual
89
10
Co
n
n
ec
ti
on
s – U
si
n
g Y
ou
r
In
st
ru
m
en
t w
it
h
O
th
er
Dev
ic
es
–
Connections
– Using Your Instrument with Other Devices –
CAUTION
Before connecting the instrument to other electronic components, turn off the power of all the components. Also, before turning any
components on or off, make sure to set all volume levels to minimum (0). Otherwise, electrical shock or damage to the components may
occur.
Using External Audio Devices for Playback
You can connect a stereo system to amplify the instrument’s sound by using the AUX
OUT [L/L+R]/[R] jacks.
Right
(higher-key side)
Left
(lower-key side)
Front (keyboard side)
Connecting Audio Devices
NOTE
Use audio cables and adaptor
plugs having no (zero) resistance.
NOTE
Use only the [L/L+R] jack for
connection with a monaural
device.
NOTICE
To avoid possible damage to
the devices, first turn on the
power to the instrument, then to
the external device. When
turning off the power, first turn
off the power to the external
device, then to the instrument.
Since this instrument’s power
may automatically be turned off
due to the Auto Power Off
function (page 16), turn off the
power to the external device, or
disable Auto Power Off when
you do not intend to operate the
instrument. If the instrument’s
power is automatically turned
off via the Auto Power Off
function, first turn off the
external device, then turn on
the power to the instrument
then the external device again.
NOTICE
Do not route the output from the
[AUX OUT] jacks to the [AUX IN]
jack. If you make this
connection, the signal input at
the [AUX IN] jack is output from
the [AUX OUT] jacks. These
connections could result in a
feedback loop that will make
normal performance impossible,
and may even damage both
pieces of equipment.
Powered speaker
Phone plug (standard)
Audio cable
Input jack
Phone plug (standard)
CVP-601
Содержание Clavinova CVP-601
Страница 113: ...CVP 601 Owner s Manual 113 ...