76
CVP-202
➔
The part number is highlighted. If you have selected a part other
than
R1
or
R2
, the “
Clear part
?” message will be displayed.
The R1 part is initially selected and set to
record.
Any part you select can be set to record by using the rightmost LCD
button to select
REC
after selecting the part.
R1
Rhythm 1
R2
Rhythm 2
Bs
Bass
C1
Chord 1
C2
Chord 2
Pd
Pad
P1
Phrase 1
P2
Phrase 2
Recording part
• Only one part can be set to record.
• All other parts will be set to PLAY (the
part number is surrounded by a box) or
OFF (only the part number is dis-
played).
Part containing no data
Playback part
OFF
Clear part?
• If the source style is a preset style or a
style loaded from an optional Style File
disk, parts other than R1 and R2 must
be cleared before they can be re-
corded.
• The “Clear part?” message will not be
displayed if the selected part does not
contain any data.
➾
Press
OK
to clear the part and continue, or
CANCEL
to abort.
The preset voice for the part being re-
corded is initially selected.
At this point you can also select the voice you want to record the part
with. Select the voice as you would the main keyboard voice (see page
29).
Part
Voices that can be used
R1
Any drum or SFX kit in PERCUSSION group
R2
Any
Others
Any except a drum kit or SFX kit
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Creating Your Own Styles
74
N
Select the part you want to record.
...............................................
Use the
PART
LCD button, the data dial, or
[–]
and
[+]
buttons to
select the part you want to record.
M
Select the voice for the part.
.................................................................